Electromagnetic flowmeter lining material should be selected according to the measured medium itself corrosive, temperature and abrasive.1. ordinary rubberMedium temperature of 60 ℃, for corrosive waste water or non-corrosive conductive liquid measurement, generally used in urban water supply and dr

The pipeline is not filled with liquid or the liquid contains bubbles. Solution: If the liquid in the pipeline is not full, the magnetic flow sensor should be changed to a position where it can be fully filled when installed horizontally.

Generally,the calibre of the electromagnetic flowmeter should be consistent with the measured pipe, when we use magnetic flow meter the medium at3-5m/s, the accuracy is better than other flow rate. The full range of the electromagnetic flowmeter must be greater than the maximum flow.