Vortex flowmeter for steam, air, and gas applications, industrial flow measurement

Industrial vortex steam flow meter from manufacturer for precise process control

Real photo of vortex steam flow meters for industrial steam and gas measurement

Wafer Connection Vortex Flowmeter

Nominal diameter: DN15~DN300

Accuracy: ±1%/±1.5%

Process Temperature: -200℃ ~ +400 ℃

Measurable Media: saturated steam, superheated steam, gases & liquids (also cryogenic)

Applications: Heating & HVAC,Energy Metering, Food&Beverage, Pharmaceutical, Chemical Industry

Categories: Flowmeter, Vortex Flowmeter

Product Description

Vortex flowmeter is based on the Karman (Karman) vortex principle of research and production of measuring gas, steam or liquid volume flow, standardized volume flow or mass flow rate of the volume flowmeter. Mainly used for industrial pipeline media fluid flow measurement, such as gas, liquid, steam and other media, but also can measure the turbid liquid containing small particles, impurities, widely used in petroleum, chemical, pharmaceutical, papermaking, metallurgy, electric power, environmental protection, food and other industries.

Split type magnetic flow meter is applicable for all conductive liquids, such as: Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc.

Specification

Parameter	Specification
Model	Aitex D
Measurable media	Saturated steam, Superheated steam, Gases, Liquids (also cryogenic)
Diameter nominal	DN15~DN300
Accuracy	±1% / ±1.5%
Process connection	Tri-Clamp：DIN 32676，Flange: GB, ANSI, DIN, JIS
Medium temperature	-30℃～150℃; -50℃～250℃; -200℃～400℃
Power supply	12-32VDC
Output signal	4~20mA / Frequency / Pulse / Switch Output
Communication	HART, Modbus RS485, PROFIBUS DP
Protection grade	IP67

Vortex Flowmeter Product Features

Lightweight design with excellent compatibility and cost performance. The compact structure helps reduce installation space and cost, while supporting a wider range of flange connections.
Patented sensor encapsulation structure enables accurate measurement under high and low temperature conditions, as well as in pipelines with vibration.
High-sensitivity probe design and an ultra-wide turndown ratio ensure accurate measurement even at low flow rates.
Built-in temperature and pressure sensors are available for measuring the mass flow of saturated steam, superheated steam, and other gases.
The factory operates under a complete ISO quality management system. Every production step is supported by corresponding inspection procedures to meet international quality standards.
The factory is equipped with nationally certified liquid and gas calibration facilities. Each flowmeter is calibrated with real flow at three or more points before delivery to ensure measurement accuracy.

Built for Stable Industrial Operation

ARTang wafer vortex flowmeters are designed for reliable performance in real process conditions, with flexible output options, strong anti-vibration capability, EMC compatibility, and wide temperature adaptability.

Applications of Vortex Flow Meters

Vortex flow meters are suitable for a wide range of industries and applications, including:

Power Generation: Steam flow measurement for boiler efficiency and energy management.
Oil & Gas: Gas flow measurement in refining, distribution, and production processes.
Chemical Processing: Precise measurement of process liquids, steam, and gases.
HVAC: Monitoring of air and steam flow in heating and cooling systems.
Food & Beverage: Steam and liquid flow measurement in production and processing lines.

Vortex flowmeter calibration equipment

Factory Strength & Quality Assurance

ARTang supports industrial measurement projects with in-house production, strict calibration, certified quality control, and global exhibition experience.