Multivariable Vortex Flowmeter: Precision Measurement for Steam and Gas
Nominal diameter: DN15~DN300
Accuracy: ±1%/±1.5%
Process Temperature: -200℃ ~ +400 ℃
Measurable Media：saturated steam, superheated steam, gases & liquids (also cryogenic)
Applications：Heating & HVAC,Energy Metering, Food&Beverage, Pharmaceutical, Chemical Industry
Specification
|
Parameter |
Specification |
|---|---|
|
Model |
Aitex E |
|
Applications |
Food & Beverage, Pharmaceutical |
|
Measurable media |
Saturated steam, Superheated steam, Gases, Liquids (also cryogenic) |
|
Diameter nominal |
DN15 ~ DN300 |
|
Accuracy |
±1% / ±1.5% |
|
Process connection |
Tri-Clamp：DIN 32676，Flange: GB, ANSI, DIN, JIS |
|
Medium temperature |
-30℃～150℃; -50℃～250℃; -200℃～400℃ |
|
Power supply |
12-32VDC |
|
Output signal |
Output Signal |
|
Communication |
HART, Modbus RS485, PROFIBUS DP |
|
Protection grade |
IP67 |
Multivariable Vortex Flow Meter Product Features
Enhanced Anti-Vibration Performance
Patented sensor encapsulation design and the latest DSP filtering algorithm greatly improve the anti-vibration performance of the vortex flowmeter, ensuring stable measurement in complex working conditions.
Wider Turndown Ratio
The vortex shedder and sensor probe are specially designed to increase the turndown ratio and lower the minimum measurable flow rate.
Easy-to-Remove Clamp Connection
The clamp connection design allows quick disassembly and cleaning, making it suitable for food and beverage, pharmaceutical, and other hygienic applications.
Optional Temperature and Pressure Compensation
An integrated temperature and pressure compensation solution is available for measuring the mass flow of steam and gas.
ISO-Certified Manufacturing Process
The production process is certified according to ISO standards, ensuring consistent manufacturing quality and reliable product performance.
Real-Flow Gas Calibration Before Delivery
With professional gas calibration facilities, each vortex flowmeter is real-flow calibrated at no fewer than three points before delivery.
Engineered for Demanding Process Conditions
ARTang vortex flowmeters are built to perform reliably in steam, gas, and liquid measurement applications. With flexible signal outputs, vibration-resistant design, EMC protection, and wide temperature adaptability, they provide stable flow measurement across challenging industrial environments.
Vortex flowmeter with current, pulse frequency and RS-485 output options
EMC compatibility for stable operation in industrial control systems
Designed for ambient temperatures from -40°C to 60°C
Strong anti-vibration performance for stable vortex flow measurement
Applications of Vortex Flow Meters
Vortex flow meters are widely used in industrial applications for measuring steam, gas, and liquid flow. They are suitable for boiler systems, compressed air systems, process gas lines, HVAC utilities, and general industrial flow monitoring where stable measurement, low pressure loss, and long-term reliability are required.
- Power Generation: Steam flow measurement for boiler systems, energy management, and plant efficiency monitoring.
- Oil & Gas: Gas, steam, and process liquid measurement for refining, production, and distribution systems.
- Chemical Processing: Measurement of steam, gases, and compatible process liquids in chemical production lines.
- HVAC & Utilities: Air, steam, hot water, and utility flow monitoring for heating, cooling, and building systems.
- Food & Beverage: Steam and liquid flow measurement for processing, cleaning, sterilization, and production lines.
Vortex flowmeter calibration equipment
Vortex Flow Meter Calibration Before Delivery
Each vortex flow meter is calibrated before delivery to verify its measurement accuracy and stability. Through liquid flow calibration, we ensure the instrument performs reliably under real working conditions and meets the required accuracy standards before shipment.
Factory Strength & Quality Assurance
ARTang supports industrial measurement projects with in-house production, strict calibration, certified quality control, and global exhibition experience.
Factory Production
In-house production and assembly for stable product quality and reliable delivery.
CNC Machining Equipment
Product Assembly
CNC Machining
Welding Process
warehouse
Technical Support Department
Certified Quality
Product certificates and quality control systems support reliable industrial measurement applications.
CE
ISO
3-A
NEPSI
Exhibition Experience
ARTang meets customers and distributors at industry exhibitions to better understand project needs and market requirements.
