The electroplating plant uses an electromagnetic flowmeter to measure the flow through the pipe in the process of alkali-adding, oil-removal, to control the alkali liquid quantifiably, to prevent the excessive alkali-washing, excessive alkali-washing will damage the electrop.

The workers need the value of supply and recharge flow detected by electromagnetic flowmeter to determine the opening or stopping of pump, and to reduce water loss.

Project Requirements1.Using electromagnetic flowmeter in the pulp supply system in the paper-making process, measuret and control of pulp flow;Process of fragmentation - -Measure the flow rate of the slurry to ensure the stability of the slurry during groutingGrouting Process -The ARTang Electromag

Installing the electromagnetic flowmeter in the pipeline of the dosing system in order to automatically adjust and control the dosage of the drug and ensure the reasonable operation of the pump unit so as to make the management more scientific.

Customer's feedbacks about on-site issues that the customer had purchased several AR-Tang Aimag H sanitary electromagnetic flowmeter drinks, the instruments are used to control flow during the drinks production, and recently discovered that a DN150 calibre electromagnetic flowmeter showed a slight fluctuate.

Customer's feedbacks about on-site issues that the signal of electromagnetic flowmeter is abnormal and the transient flow is shown as negative.